Emtec Movie Cube S800, 750GB User Manual

Home Multimedia CenterMovie Cube S700/S800User’s Manual(Version 1.0.0)

In this way, you can have the highest quality video and audio via a single cable.1.4.3.6 ANT. / RF INFollow the picture and plug a TV Aerial or analog

(2) Follow the picture and plug in the other connector on your coaxial cable or optical fiber to the digital audio device.(not supplied)1.4.5 Power co

1.4.7 WLAN connection(1) Make sure the player is powered on;(2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of the

1.5 First Time Usage1.5.1 Firmware InstallationFor users who bought the player without a HDD inside, and want to install a SATA HDD, please see ‘HDD F

control, the player will enter standby mode. 3. Language controlThe system language of this player can be set to English or other languages. In the se

2. About the Player 2.1 Remote ControlAll procedures in this manual can be carried out using the remote control buttons. See the following for detail

2 home home button:Press to view the main interface.3 menu menu button:Press to activate tools menus: Press in the browser menu to rename and delete

Press to increase the volume.11 enter enter button:Press to select options in menus.12 vol - vol - button:Press to decrease the volume.13 mute mute bu

Press to go to the previous file or the previous chapter on a title.23 navigational buttonsnavigational button:Press the arrow buttons to select menu

19 / 86

Table of Contents1. Introduction

2.2 Front PanelNo. Name Function1 LCD screen Menu & icon information will be displayed on the screen.2 Infrared receiver window Receiving IR signa

2.3 Rear Panel1. Air Flow hole 2. Y/Pb/Pr OUT jack3. V2: Video OUT jack 4. L2: Audio OUT jack (Left Channel)5. V1: Video IN jack 6. L1: Audio IN jack

3. Getting StartedPower on the system, and after a few seconds, the system will enter the main interface. To return to this menu, you can also press t

In this menu, you can playback the recorded video or TV programs; you can also Merge/Split/Delete/Edit all the recorded titles.Select the Playback ico

4.1 Watching Analog TV programsTo enter the Analog TV mode, select the Analog TV icon on the main interface.The following are some functional buttons

Press the left / right button to select from TV and Radio. Press the prev / next button to page up /down. Press the up / down button to select channel

Press the prev / next button to change channels. Press the left / right button to change date. Press the up / down button to change program. Press the

Press the up / down button to select the subtitle, and press the enter button to confirm.5. The Title List Menu for Recorded VideosThe Title List men

A/V IN to view and edit recorded DVB-T or Analog TV programs.5.1 Title List MenuNumber Function Description1 Menu Bar Press the left / right button to

5.3 Deleting TitlesTo delete a title, do the following:1. Press the left / right button on the remote control to select the Delete tab from the menu b

7.4 Changing Audio Settings ...

4. Press the navigation buttons to select letters and numbers. Select CAPS to toggle between uppercase and lowercase letters. Press <- to delete a

5.6 Title Edit MenuPress the left / right button on the remote control to select the Title Edit tab from the menu bar. Press the enter button, and the

Select SET A and press the enter button to mark the start for the section to be deleted. Select SET B and press the enter button to mark the end of th

prev / next button on the remote control.An editing screen appears. When you reach the point at which you wish to add the mark, press the enter button

Return Select to return to the main screen.Delete All Title Select to delete all titles.5.8 Saving Your Recorded Titles All the recorded titles are st

Use the left / right button on the remote control to move between fields and press the up / down button to adjust each setting.Source Select the vide

Select the schedule you want to edit from the list and press the enter button. The schedule setting screen appears. Modify the schedule as described i

Select Enable the timer by VPS, Enable the timer by user’s setting or Pause the selected schedule. Press the enter button to confirm.6.5 Viewing Recor

7. Setup MenuThe Setup Menu allows you to configure DVB-T / Analog TV, video, audio, record, network and system settings. To enter the menu, press the

Channel Scan Select to scan for available Digital Terrestrial TV channels.Press the up / down button to select from AUTO SCAN and MANUAL SCAN, and pre

1. Introduction1.1 PrefaceDear Customer,Thank you very much for purchasing the Movie Cube S800. In the digital era, this product is a great home enter

Channel Set Select to edit channel information.Press the up / down button to select DVB-T, and press the enter button to confirm.In this menu, you can

Analog TV RegionSelect to set the region for Analog TV.Press the up / down button to select, and the enter button to confirm.Channel Scan Select to sc

Channel Set Select to edit channel information.Press the up / down button to select Analog TV.In this menu, you can edit the Status, Name, Fine Tune,

Aspect Ratio Select to set aspect ratio.Press the up / down button to select from Pan Scan 4:3, Letter Box4:3, or 16:9. Press the enter button to conf

Brightness Select to set brightness levels.Press the up / down button to adjust brightness. The new setting is previewed on screen. Press the enter bu

Night Mode Select to set night mode.Press the up / down button to select from Off, On, and Comfort. Press the enter button to confirm.Digital Output S

Quality Select to set the default recording quality setting.Press the up / down button to select the quality setting you require.The highest quality s

Auto Chapter Select to add chapter marks automatically at set intervals.Press the up / down button to select the interval you require. An automatic ch

Press the up / down button to select from HDD and USB. Press the enter button to confirm. 7.6 Changing Network SettingsPress the left / right button o

Wired LAN Setup Select to set the Ethernet settings. Before using the network functions, please check following items:1)Connect the player to network

1.2 Packing ListPart QuantityPlayer 1A/V cable 1SCART in adapter 1 (no need for USA)USB cable 1Remote Control 1Remote Control Battery 2AC/DC adaptor 1

Wireless Setup Please refer to the user’s guide to wireless function in the package of EMTEC Wi200 USB adapter for more details about these settings.N

Press the up / down button to select the language. Press the enter button to confirm.Text EncodingSelect to set text encoding.Press the up / down butt

Parental ControlSelect to set the TV parental control options.A password will be needed for the modification. The default one is ‘0000’. Press the num

HDD FormatSelect to format the HDD.Press the up / down button to select HDD Format. Press the enter button to confirm.Press the left / right button to

Restore DefaultSelect to restore factory defaults.A confirmation message appears. Select OK and press the enter button to restore all settings to d

Press the up / down button to select. Press the enter button to confirm.Transition EffectSelect to set the transition effect for photo slide show.Pres

The capacities of the recording, time shift and multimedia partitions are listed here. Press the enter button to confirm.InformationSelect to view the

Press the up / down button to select the device on which the media is stored. Choose from HDD, USB, NET, and press the enter button.When data on HDD,

8.3 Browsing PhotosUse the left / right button on the remote control to select the Photos tab.All directories and supported image files in current dir

While browsing a movie in full screen mode, you can press the zoom button to zoom in/out the image. Four zoom levels are available.8.5 Browsing via Ne

rules:(1) This player may not cause harmful interference;(2) This player could accept some interference received including interference that may cause

Note: 1. While browsing high definition video files (resolution up to 720p / 1080i / 1080p) via Ethernet or WLAN, the video might be buffering. It is

Network Browser Select to set Net User ID, Net Password, and Specific File Server IP, which enables to browse files on NET through ‘My_Shortcuts’.Sele

Select the shortcut you added and press the enter button to confirm.Then select the shared multimedia file that you want to browse.8.6 Renaming / Dele

Press the navigation buttons to select letters and numbers. Select CAPS to toggle between uppercase and lowercase letters. Press <- to delete a let

selections are allowed. See photo below. 8.7.2 Browsing the playlistPress the up / down button to select Play List in the browser menu. And press the

9. Media LibraryOwning to a powerful search engine, the library menu allows you to search and browse multimedia files stored on the internal HDD in mo

Use the navigational buttons to select, and press the enter button to confirm. Select OK and press the enter button, and then the files you desired wi

Press the up / down button to select the album, and press the enter button to confirm.Quick-Search You can also press the right button to turn on a Qu

Press the up / down button to select from Update, Search, All, and Date. And press the enter button to confirm.Update Select to update and synchronize

All Select to list all the photos in the library.Date Select to search for photos by date.Press the up / down button to select the date, and press the

1.4 Connection1.4.1 Connect to Computer(1) Make sure the player is powered on;(2) Plug in the squarish connector of the USB cable to this player’s USB

bar, and press the enter button to confirm. And then photos with name starting with the specific characters will be displayed onto the top. Press the

Use the navigational buttons to select, and press the enter button to confirm. Select OK and press the enter button, and then the files you desired wi

Press the up / down button to select the actor, and press the enter button to confirm.Genre Select to search for movies by genre.Press the up / down b

Press the up / down button to select characters on the Quick-Search bar, and press the enter button to confirm. And then movies with name starting wit

Press the up / down button to select device. Press the left button to cancel, and the right button for next step. Step 2: Select the source files you

Step 4: Proceed to copy selected files.Press the up / down button to select OK, press the enter button to confirm. And the copy will start. 11. NAS F

Then you can view, and edit the files stored on the hard disk installed on the player. In this way, you can also playback and copy files via network b

12.1 Station List MenuPress the up / down button to select STATION, and press the enter button to confirm.Press the up / down button to select the sta

12.2 Genre List MenuPress the up / down button to select GENRE, and press the enter button to confirm.Press the up / down button to select the genre y

All the favorite stations you added from the station list menu can be found and managed here.When a station is highlighted, you can press the menu but

1.4.3 TV connection1.4.3.1 A/V IN (1) Follow the picture and plug in the 3 color connector to the player’s A/V IN jack;(2) Follow the picture and plug

Download the latest firmware from our official website.Step 1: Prepare the USB Pen Drive You will need a USB Pen Drive for firmware upgrade. Copy the

Please wait for several minutes, the installation will be completed, the LED indicators will go off, and the player will be powered off automatically.

SUBTITLE FORMATS SURPORTED:SRT, SMI, SSA, IDX/SUB, SUBRECORDABLE DEVICES SUPPORTED:Built in HDDUSB HDDVIDEO RECORDING MODEMode 80 GB HDD 120 GB HDD

WLAN IEEE 802.11b/g, up to 54Mbps (supported by the optional WLAN USB Adapter)ANALOG TV SYSTEMFrequency Range 44.25MHz~863.25MHz

(1) Make sure the player is powered on. If it is off, the computer will not be able to find the player;(2) Make sure the player is connected to comput

Answer:In the JPEG format there are different modes. The player doesn’t support all the modes. So you have to change your photo format first as follow

Question10. Why couldn’t the player find the hard disc? Answer:Make sure the firmware is installed correctly, and no system partitions on the HDD wer

(1) Follow the picture and plug one connector on the SCART cable to the player’s SCART socket;(2) Follow the picture and plug the other connector on t